1300 SprayMold Extrusion Pro | Spinneret Cleaning & Lubrication

1300 SprayMold Extrusion Pro is a premium high-temperature silicone-based spinneret cleaner and anti-stick lubrication spray, engineered specifically for the demanding needs of synthetic fibre production, melt-spinning lines, monofilament extrusion, and high-shear polymer processing equipment.

Formulated with advanced heat-stable silicone polymers, 1300 SprayMold Extrusion Pro prevents polymer build-up, eliminates die face sticking, reduces carbonisation, and maintains uniform filament flow — ensuring maximum output efficiency and superior fibre quality.

Whether you are extruding nylon, polyester, PP, PET, or specialty polymer fibres, 1300 SprayMold Extrusion Pro  enhances spinneret cleanliness, extends service life, and stabilises production cycles.

🌟 Key Features & Benefits

✔ High-Temperature Resistance

Performs reliably under extreme melt-spinning temperatures, preventing thermal degradation and carbon residue formation.

✔ Anti-Stick & Anti-Build-Up Action

Creates a clean, non-reactive, low-friction surface on spinnerets, dies, and nozzles — reducing polymer adhesion and improving filament uniformity.

✔ Optimised for Melt-Spinning Lines

Ensures smoother polymer flow, consistent denier, and fewer broken filaments, contributing to:

• Better fibre quality

• Reduced line stoppage

• Lower maintenance effort

✔ Cleaner Spinnerets, Longer Equipment Life

Regular use helps minimise clogging, scorching, and die wear, reducing downtime for mechanical cleaning.

✔ Ready-to-Use Aerosol Convenience

Precisely sprays a thin, even film without excessive build-up or dripping, ensuring quick application during scheduled maintenance.

✔ Safe on Metals & High-Grade Alloys

Compatible with stainless steels, hardened extrusion alloys, and plated spinneret surfaces.

🧵 Ideal Applications

• Melt-spinning & fibre extrusion lines

• Polyester, nylon, PP, PET, and specialty fibre production

• Filament & monofilament extrusion

• Spinnerets, dies, capillary nozzles, bush bars

• Hot runner nozzles, die plates & polymer flow components

• Preventive maintenance during line changeovers

🛠️ How to Use

1. Shut down or isolate the spinneret area where cleaning or coating is required.

2. Shake the can thoroughly for a uniform formulation.

3. Hold 15–20 cm from the surface and spray a thin, even film over the spinneret or die face.

4. Allow a few seconds for the lubricant to settle.

5. Resume operation or proceed with mechanical cleaning as required.

6. Reapply during maintenance cycles for optimal anti-stick performance.

⚠️ Safety & Handling

• Use in well-ventilated areas.

• Avoid spraying on hot surfaces above recommended temperature limits.

• Keep away from ignition sources; contents under pressure.

• Refer to the MSDS for complete safety guidance.

🌐 Why Choose Extrusion Pro?

1300 SprayMold Extrusion Pro delivers industry-leading cleaning and lubrication performance, providing textile manufacturers and fibre producers with a dependable solution to improve productivity, reduce downtime, and achieve consistent filament excellence — every time.